Types of leather used in shoes
One of the most preferred leathers for dress/business shoes is calfskin. Because calfskin comes from a calf it has a tighter grain and fiber, and is thinner and lighter than cow hide; this makes for better shoe leather. Other types of animal leather are Kidskin (from goat), Pigskin/Peccary (from pig), Cordovan Shell (from horse), and of course other exotic animal skins like buffalo, elephant, kangaroo and so on. There are also bird skins, like ostrich, and reptile skins like alligator, crocodile, lizard and snake. Reptile skins tend to last longer and need less care than animal leathers, but they are also more expensive. Bovine leather (cow hide / calfskin) is by far the most commonly used leather in shoes.
- A high quality, all leather, shoe uses leather in the following places:
- The outsole of the shoe (the part that touches the ground)
- The insole of the shoe (the part your foot rests on)
- The lining of the shoe (between your foot and the upper)
- The heel of the shoe (as in stacked layers of leather to create the heel)
- The shoe upper (the rest of the shoe, excluding the items above)
Shoes that are not all leather may have rubber soles, insoles made of various materials, and heels made of wood, rubber or plastic. I would suggest going with all leather if you can, with the exception of perhaps rubber soles – if you need to stand in cold wet environments. Leather thicknesses is measured in ounces of weight to thickness in fractions of an inch:
- 1oz = 1/64
- 2oz = 1/32
- 3oz = 3/62
- 4oz = 1/16
- 5oz = 5/64
- 6oz = 3/32
- 7oz = 7/64
- 8oz = 1/8
- 9oz = 9/64
- 10oz = 5/32
- 11oz = 11/64
- 12oz = 3/16
- 13oz = 13/64
- 14oz = 7/32
A leather outsole on a man’s shoe is around 12oz in thickness on average. A leather insole is typically around 14oz in thickness to accommodate the welt. A shoe upper is around 5oz on a typical dress/business shoe, The lining is about 1oz.
All of these thicknesses can vary due to leather type, welt method, and shoe style. For example Italian shoes tend to be sleeker and therefore use thinner leather in the soles and uppers to achieve the look. Soles that are Blake stitched or bond welted don’t require as thick an insole as Goodyear welted shoes.
The quality of the leather used in a given line of shoes is determined by the grade of leather the shoe manufacturer purchased to make the shoes. The leather on a shoe upper is typically grain side out leather, but shell cordovan has no grain, waxed leather is used inside out (flesh side out), and suede leather has had the grain removed entirely. Leather that has blemishes in the grain are often buffed (sanded) of the grain side to remove the blemishes, which then requires the grain to be corrected.
about corrected grain leather
Corrected grain leather is sometimes referred to as bookbinder leather. If the grain has not been corrected it is referred to as full grain. One of the final stages of tanning leather is applying the color and finish (although chromium tanned leather can be bought in the “wet blue” state” it comes out of the tanning process in). The high quality leather is typically aniline dyed, which saturates the color completely through the leather. The leather won’t have a coated feel to it. The leather is also pressed under high pressure to give it some shine, and a very thin coat of clear or colored acrylic is applied as a final finish, in most cases.
Some shoe manufacturers may also add an additional clear or colored finish coat. In the case of corrected grain, the pressing and acrylic finish is also where the corrected grain is applied. Because of this, corrected grain leather will have a thicker finish than non-corrected grain, and may also be a little shinier. Corrected grain finishes can range from a simple smooth surface to faux animal skin and pebble grain. Corrected grain leather is typically lower grade leather, simply because the grain and aniline dye would be covered up if done to a higher quality leather. And, the thicker the finish the poorer the leather quality can be. There are exceptions to this rule of course; for example: some pebble grain shoes/boots can be made of good quality leather, but it is hard to tell because of what the finish covers up.
The best way to tell if a shoe is made of corrected grain leather (actually, leather that has a corrected finish on the grain) is to flex the shoe. The finer the creases the more finish on the shoe (the greater the correction). Shoes come in all types and qualities of leather, so it helps to have an idea of what you are really buying. Another of the biggest indicators you can use for determining if a shoe uses corrected grain is price. Quality costs good money. Yet another way is to look at the shininess since corrected grain leather has a much thicker layer of acrylic.
Hopefully this article will give you some things to consider when you are you are looking to buy a shoe.